G7 8.2

Name: G7 8.2
SKU: 25333
Availability: InStock

$499.98

Download Manual

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Dont have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."

Category: G7 Subwoofers

Description
Additional information

Download Manual

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Additional information

Weight	31 lbs
Dimensions	12.125 × 12.125 × 12.45 in

Our engineers at DB Drive have designed this subwoofer from the ground up to shake the ground up. The double stitched foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.

High excursion foam surround
True Carbon fiber dust cap
Custom Die cast Aluminum Basket
Triple Layer Progressive dampeners
Large Gauge push speaker terminals
3-inch-high temperature 4-layer voice coil
Custom Rubber protective magnet band
Triple stacked Y35 ferrite oxide magnet

Physical Structure

Outside Diameter (A)	9.17″ (233mm)
Cutout Diameter (B)	7.48″ (190mm)
Mounting Depth (C)	7.38″ (187.45mm)

General Specifications
Structure	8″ (20.3cm) Woofer
Dynamic Power Handling	2500 Watts
Nominal Power Handling	1250 Watts
Impedance	Dual 2Ω Voice Coil

Parameters
Resonant Frequency (fs)	48.936Hz
D.C. Voice Coil Resistance (Re)	2 x 3.2Ω
Mechanical Quality Factor (Qms)	2.010
Electrical Quality Factor (Qes)	0.699
Total Quality Factor (Qts)	0.518
Equivalent Air Volume to Cms (Vas)	3.478 L
Mass of Diaphragm/Coil (Mms)	212.219 g
Force Factor (Bl)	18.336
Sound Pressure Level (SPL)	79.5 dB

Recommended Enclosures

Woofer Cut-out	7.48″ (190mm)
Mounting Depth	7.38″ (187.45mm)
Sealed Box	Not Recommended
Vented Box	1.4 ft³ (39.64L)
Vent Area	12.57 in² (81.09 cm²)
Vent Length	15″ (38.1 cm)
Tuning	36Hz
Dynamic Power	2500 Watts
Nominal Power	1250 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).