G7 10.1

G7 10.1

$1,099.98

-

Download Manual

 

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Dont have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."
Category:
000

Download Manual

 

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Additional information

Weight 70 lbs
Dimensions 16.5 × 16.5 × 15.7 in

Our engineers at DB Drive have designed this subwoofer from the ground up to shake the ground up. The double stitched foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.

  • Xtreme Excursion Surround
  • True Carbon fiber dust cap
  • Proprietary Reinforced Aluminum Die-Cast Basket
  • Tri-Layer Progressive Dampeners with Integrated Tinsel Leads
  • 8 Gauge Push Spring Input Terminals
  • 4-Layer Aluminum Flat Wire Voice Coil
  • Custom Rubber protective magnet band
  • Triple Stacked Ferrite Magnets
  • Excursion Induced Motor Cooling
  • Radial Balanced Paper Glass Fibrillated Mixed Cone
  • Aluminum Anodized Former With Reinforced Triple Joint

Physical Structure

Outside Diameter (A) 11.63″ (293.40mm)
Cutout Diameter (B) 10.25″ (260.35mm)
Mounting Depth (C) 9″ (228.6mm)
General Specifications
Structure 12″ (30.48cm) Woofer
Dynamic Power Handling 8000 Watts
Nominal Power Handling 4000 Watts
Impedance 1Ω Voice Coil
Parameters
Resonant Frequency (fs) 34.03Hz
D.C. Voice Coil Resistance (Re) 2 x 1Ω
Mechanical Quality Factor (Qms) 2.314
Electrical Quality Factor (Qes) 0.623
Total Quality Factor (Qts) 0.491
Equivalent Air Volume to Cms (Vas) 15.567 L
Mass of Diaphragm/Coil (Mms) 298.726 g
Force Factor (Bl) 11.983
Sound Pressure Level (SPL) 81.8 dB

Recommended Enclosures

Woofer Cut-out 11.14″ (283mm)
Mounting Depth 9.6″ (244mm)
Sealed Box Not Recommended
Vented Box 3.5 ft3 (99.12L)
Vent Area 52 in2 (335.4 cm2)
Vent Length 28″ (71.12 cm)
Tuning 34Hz
Dynamic Power 8000 Watts
Nominal Power 4000 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).

1 & 2 Ohm DVC wiring Configuration

4 Ohm DVC wiring Configuration

Related products